ASME SB366 Nickel Alloy 200 Pipe Bend, Nickel 200 Pipe Fittings, DIN 2.4068 Stub End, UNS N02200 Buttweld Elbow, ANSI B16.9 Alloy 201 Pipe Cap, ASTM B366 Nickel 201 Buttweld Fittings, UNS N02201 Seamless Fittings, Nickel Pipe Fittings Supplier in Mumbai, India.
Kalpataru Piping is a well-known distributing unit of Nickel 200 Pipe Fittings / Nickel 201 Pipe Fittings, which reacts well to hardening by cold working. Nickel 200 Elbow Pipe Fittings are used in a number of applications where the range of temperature goes beyond up to 550 Degree Celsius, such as for components and equipment. Nickel 201 Tee Pipe Fittings is also used in case hardening boxes, furnace equipment and iron, steel, along with non-ferrous industries, energy conversion plants, engineering industry, cement industry, and so on. Nickel 200 Reducer Pipe Fittings preserves properties of corrosion-resistant by putting off diminution of chromium content near the grain boundaries, throughout the exposure within critical range of temperature. These Nickel 201 Cross Pipe Fittings has excellent good welding properties, where post-weld annealing is not usually needed to re-establish its good performance in an extensive range of corrosive forms.
Nickel 201 Long Radius Bend, DIN 2.4066 Equal Tee, MSS-SP-43 Nickel 200 LR & SR Elbow, Nickel Alloy 200 Reducer, Nickel 201 Welded Pipe Fittings Stockist, B16.9 Nickel Alloy 201 Pipe Elbow, Nickel 200 Piggable Bend Exporters in India.
Meanwhile, Nickel 200 Bend Pipe Fittings also has soaring properties of creep and stress rupture. Nickel 201 Stub End Pipe Fittings is weldable by general resistance and fusion methods. Also, like most other austenitic material, these Nickel 200 End Cap Pipe Fittings work hardens and may perhaps need annealing after stern forming. The important characteristic of Nickel 201 Dish Cap Pipe Fittings is its confrontation to inter-granular corrosion. These Nickel UNS N02200 Pipe Fittings as well has low menace of weld decay because of Titanium addition.
Nickel 200/201 Butt weld Pipe Fittings Specification
| Specifications | ASTM B366 / ASME SB366 |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ | Welded Butt Weld Fittings : 1/2″ – 48″ |
| Schedule | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Thickness | 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc. |
| Type | Seamless / ERW / Welded / Fabricated |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Nickel 200/201 Buttweld Fittings Equivalent Standard Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
200 / 201 Nickel Alloy Pipe Fittings Types
ASTM B366 Nickel Alloy Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Ni 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Ni 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
ASME SB366 Nickel Buttweld Pipe Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 / 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Other Available Stock of ASTM B366 Nickel 200/201 Pipe Fittings
- Nickel 201 90 Deg Elbow Dealer
- Nickel 200 45 Deg Elbow Stockist
- ASTM B366 Nickel 201 Equal Tee
- Nickel 200 Unequal / Reducing Tee
- Nickel Alloy 201 Eccentric Reducer
- ANSI/ ASME B16.9 Nickel 200 End Cap
- Nickel Alloy 200 Reducing Nipple
- SB366 Ni Alloy 201 Concentric Reducer
- Ni 200 90 Deg Short Radius Elbow
- 201 Nickel Short Stub End Stockholder
- ASME SB366 Nickel 200 Barrel Nipple Trader
- B16.9 Nickel 201 45 Deg Long Radius Elbow
- Nickel 200 Long Stub End Manufacturer
- Nickel Alloy 201 Straight Tee in India
- Nickel 200 Lap Joint Stub End Supplier
- ASTM B366 Nickel 200 /201 Tee Supplier
- Nickel Alloy 200 /201 Cross Fitting
- ASTM B366 200 /201 Nickel Stub End
- ASTM B366 Nickel 201 Piggable Bend
- Grade 200 Nickel Long Radius Elbow
- SB366 Nickel 201 Short Radius Elbow
- Nickel 200 Swage Nipple / Reducing Nipple
- B16.9 Nickel 201 Unequal Cross
- B366 Nickel 200/201 Bend in Mumbai
- Nickel 200 U Bend Wholesaler
- Nickel Alloy 200 Pipe End Cap
- Nickel 201 Seamless Pipe Fittings
- 200/201 Nickel Buttweld Cap Supplier
- Nickel 201 Pipe Nipple Distributors
- Nickel UNS N02200 Pipe Fittings Exporter
- Alloy UNS N02201 Pipe Fittings Supplier
- Nickel DIN 2.4066 Long Radius Bend
- Alloy DIN 2.4068 180° Return Bends
- Nickel 200-201 1D / 3D / 5D Elbow
- Nickel 200/201 ASME B16.9 Buttweld Bend
- Nickel 200 Seamless / Welded Elbow
Suppliers and Exporters of Nickel 200 / 201 Pipe Fittings in Countries Like
Saudi Arabia, malaysia, Hong Kong, Singapore, Hungary, Greece, Sweden, Tunisia, Nepal, Italy, Indonesia, Malaysia, Estonia, South Africa, Morocco, Colombia, Czech Republic, Kuwait, Nigeria, Libya, Yemen, thailand, Venezuela, Germany, Lithuania, Ireland, Mexico, Philippines, Japan, Gambia, New Zealand, Australia, Gabon, Thailand, Chile, Bhutan, South Korea, Afghanistan, Kazakhstan, Bangladesh, Namibia, Austria, Qatar, Peru, srilanka, Finland, Slovakia, Norway, Brazil, Costa Rica, Netherlands, Portugal, Iran, United Arab Emirates, Ghana, Nigeria, Taiwan, Croatia, United Kingdom, Macau, Zimbabwe, Algeria, Jordan, Poland, Iran, Bolivia, cyprus, brazil, Mongolia, Chile, Azerbaijan, Sri Lanka, Russia, China, Argentina, Turkey, Puerto Rico, Serbia, Ecuador, Trinidad & Tobago, Mexico, Spain, Switzerland, Oman, Canada, Tibet, Egypt, Poland, Israel, India, Romania, Lebanon, United States, mexico, Bulgaria, Vietnam, Denmark, Belarus, Bahrain, Ukraine, France, Kenya, Belgium.