Tube To Female Pipes

HomeBlogTube To Female Pipes

Category: Tube To Female Pipes

CategoriesTube To Female Pipes

Super Duplex S32750 Tube to Female Pipes Supplier & Manufacturer

Kalpataru Piping Solution is a leading manufacturer and exporter of high-quality Super Duplex S32750 Tube to Female Pipes, which can only be hardened by cold working and cannot be toughened by heat treatment. Parts constructed from Super Super Duplex S32750 Tube Fittings tend to find good use across a wide range of chemical applications that might otherwise oxidise the metal, in addition to outstanding resistance to all kinds of pitting and cracking. Non-oxidizing acids such as hydrochloric acid and sulphuric acid have no effect on Super Super Duplex S32760 Tube Fittings.

Superior thermal stability and manufacturing qualities distinguish Super Super Duplex S32750 Female Connector Fittings from earlier B-family alloys. Super UNS S32760 Female Connector Fittings, which were newly created, can withstand stronger non-oxidizing acids than C-type alloys and can endure oxidising impurities that B-type alloys cannot. It has been extensively used to protect against the most corrosive FGD systems and the most sophisticated pharmaceutical reaction vessels. UNS S32750 Compression Fittings is particularly resistant to pitting and crevice corrosion.
In the fertiliser business, Super Super Duplex S32760 Compression Fittings have been particularly effective as phosphoric acid heat exchanger tubing and other process components. Super Super Duplex S32750 Ferrule Fittings have a high chromium content, making them ideal for use in oxidising solutions and mixed acid pickling. Standard shop fabrication procedures can easily weld and process UNS S32760 Double Ferrule Fittings.
Super Duplex S32750 / S32760 Tube to Female Pipes Specifications

Specifications : ASTM A815 ASME SB815
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – 4000 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.

UNS S32750 / S32760 Super Duplex Tube to Female Pipes Chemical Composition

S32750 / S32760 C N P Si Mn Mo Ni Cr S Other
0.030 0.24/0.32 0.035 0.80 1.20 3.0/5.0 6.00/8.00 24.0/26.0 0.020 Cu:0.50

Super Duplex Steel S32750 / S32760 Tube to Female Pipes Mechanical Properties

S32750 / S32760 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for S32750 / S32760 Super Duplex Stainless Steel Tube to Female Pipes

STANDARD UNS WERKSTOFF NR.
Super Super Duplex S32750 S32750 1.4410
Super Super Duplex S32760 S32760 1.4410
Copper Nickel Instrumentation Tube Fittings
CategoriesTube To Female Pipes

Brass Tube to Female Pipes Supplier and Manufacturer

Kalpataru Piping Solution is a leading manufacturer and exporter of high-quality brass tube to female pipes that can be utilised in both chlorinated and desaereted water. Brass Tube Fittings work well in desaereted and low hydrogen sulphide oil and gas applications.
Brass Compression Fittings, on the other hand, is susceptible to chloride attack, especially in oxidising environments. Brass Compression Tube Fittings are ideal for applications that require moderate corrosion resistance and high mechanical qualities. Brass Female Connector Fittings can withstand temperatures of up to 1292 degrees Fahrenheit (700 degrees Celsius) on a continuous basis and up to 1500 degrees Fahrenheit (816 degrees Celsius) on an intermittent basis.

Brass Ferrule Fittings are commonly heated to temperatures between 1382°F and 2102°F (750°C and 1150°C), then cooled with air. Preheating Brass Double Ferrule Fittings in the 212° F – 572° F (100° C – 300° C) temperature range is recommended for lesser deformations such as bending.
Brass Ferrule Tube Fittings should be machined at surface speeds in the annealed condition, with post-machining decontamination and passivation advised.

Brass Double Ferrule Tube Fittings is a basic, general-purpose martensitic stainless steel that provides good corrosion resistance, as well as high strength and hardness, and is utilised for severely stressed parts. Tungsten carbide designations or cobalt type high speed tools should be used to tool Brass Tube Fittings.

Brass Tube to Female Pipes Specifications

Specifications : ASTM B135 ASME SB135 / ASTM B36 ASME SB36
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Brass, 300/1000/3000PSI

Brass Tube to Female Pipes Fitting Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4
Brass Tube to Female Pipes Fitting Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modula’s of Elasticity in Tension 14000 ksi

Brass Tube to Female Pipes Test Certificates

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc