DIN 1.4876 Female Branch Tee, UNS N08800 45 Degree Male Elbow, Nickel Alloy 800 Union Tee Supplier in Mumbai, India.
Kalpataru Piping is a known manufacturer and supplier of Inconel Alloy 800 Instrumentation Tube Fittings, which in piping system allow the immediate lack of involvement of the picky part concerned. The main purpose of Inconel 800 Front Ferrule Fittings is to trim down the line from a generously proportioned to a less important pipe size, and this undoubtedly results in an enhanced flow pressure. Inconel 800 Back Ferrule Fittings are being used as a correlation point flanked by two lengths of pipes to make a change in the direction and flow in the pipe. Inconel 800 Tube End Closure Fittings are having a midpoint-to- midpoint length, along with double the indistinguishable alloy. The most important application for Inconel 800 Fitting End Closure Fittings is in heater coils and heat exchangers.
ASME SB366 Incoloy 800 Male Run Tee, Incoloy Alloy 800 Union Cross, Alloy 800 Bulkhead Union Supplier & Exporter in India.
Incoloy 800 Instrumentation Fittings Specification
Specifications | ASTM B366 / ASME SB 366 |
Size | 1/16” 1/2” & 1.5MM to 38.1MM |
Thread | NPT, PT, BST, NPS, PS, BSP |
Pressure | 6000PSI for Stainless Steel 300/1000/3000PSI for Brass |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Incoloy Alloy 800 Tube Fittings Equivalent Standard Grade
STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
Incoloy 800 | N08800 | 1.4876 | Z8NC32-21 | X10NiCrAlTi32-20 | NCF 800 | NA 15 | ЭИ670 | XH32T |
Incoloy 800 Tube Fittings Types
Incoloy 800 Compression Fittings Chemical Composition
Grade | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
Incoloy 800 | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max |
ASTM B366 Incoloy 800 Instrumentation Tube Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.94 g/cm3 | 1350-1400 ℃ | Psi – 75,000 , MPa -520 | Psi – 30,000 , MPa – 205 | 30 – 35 % |
Other Available Stock of Incoloy Alloy 800 Instrumentation Tube Fittings
- Incoloy 800 Swagelok instrumentation Fittings
- ASTM B564 Alloy 800 Nickel Reducing Union Tee
- DIN 1.4876 45 Degree Positionable Male Elbow
- ASTM B366 Incoloy® Alloy 800 Ferrule Nut
- Incoloy 800 Positionable Male Run Tee
- Incoloy Alloy JIS NCF 800 Hex Plug
- ASME SB366 Incoloy 800 Tube End Closure
- Incoloy 800 Fitting End Closure
- Incoloy 800 Parker Compression Fittings
- Incoloy 800 Bulkhead Reducing Union
- Incoloy 800 Hydraulic Fittings in India
- Incoloy 800 Single Ferrule Compression Fitting
- Incoloy Alloy 800 Ferrule Fitting Manufacturer
- Incoloy 800 Tube Fitting sizes
- Incoloy 800 Tube to Male Pipe Thread
- Alloy 800 Tube to Female Elbow
- Incoloy 800 Positionable Male Elbow
- Incoloy 800 Hex Nipple Supplier
- Incoloy ® 800 Hex Bushing Exporter
- SB564 Incoloy 800 Male Adapter
- Incoloy 800 Female Adapter
- Incoloy 800 Allen Key Plug
- Incoloy 800 Instrumentation Pipe Fittings
- Incoloy UNS N08800 Tube Cap Fittings
- Incoloy 800 Tylok Instrumentation Fittings
- Incoloy Alloy 800 Union Joint Ball
- Incoloy 800 Two Ferrule Compression Fitting
- Incoloy 800 Ferrule Tube Fittings Suppliers
- Incoloy 800 High Pressure Hydraulic Tube Fittings
- UNS N08800 Port Connector
- Alloy 800 Tube to Male Elbow
- UNS No 8800 Tube to Bulkhead Female Connector