Beryllium Copper Rods, UNS C17200 / CDA 172 Round Bars, CuBe2 C17200 Hex Bars, ASTM B196 Beryllium Copper Bar, ASME SB196 Copper Beryllium Alloy Bar Supplier in Mumbai, India.
Kalpataru Piping is a known firm that manufactures Beryllium Copper Round Bars UNS C17200, which either have a tapered shank or a non-tapered shank. Beryllium Copper Square Bars UNS C17200 is a type of fastener characterized by a helical ridge, recognized as a male thread (external thread) or just thread, which is being wrapped around a cylinder. The most common uses of Beryllium Copper Flat Bars UNS C17200 are to hold objects together and to position objects, and so may be used when the hole is a larger diameter than the fixing nut. Beryllium Copper Threaded Bars UNS C17200 with tapered shanks is designed to either be driven into a substrate directly or into a pilot hole in a substrate. Beryllium Copper Hollow Bars UNS C17200 with a non-tapered shank is designed to mate with a nut or to be driven into a tapped hole.
Beryllium Copper Hexagonal Bars UNS C17200 is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Beryllium Copper Triangular Bars UNS C17200 spread a load, and prevents damage to the surface being fixed, or provides some sort of insulation such as electrical. Beryllium Copper UNS C17200 Round Bars is a flat annulus or ring, often of metal, used to spread the load of a screwed fastening.
Beryllium Copper C17200 / Alloy 25 Copper Round Bar, ASTM B196 CuBe2 Flat Bar Manufacturers, DIN 2.1247 Round Bar Exporter in India.
Copper Beryllium Round Bar Specification
Specifications | AMS 4650, AMS 4534, AMS 4651, AMS 4533, ASTM B196, MIL C 21657, SAE J463, SAE J461 |
C17200 Beryllium Copper Round bar size | Diameter: 3mm~800mm |
Beryllium Copper Alloy 25 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Beryllium Copper C17200 Square bar size | 4mm*4mm~100mm*100mm |
Beryllium Copper C17200 Flat bar size | Thickness: 2mm~100mm |
Width: 10mm~500mm | |
Beryllium Copper C17200 Hex Bar size | 2mm~100mm |
C17200 / ALLOY 25 Beryllium Copper Billet Size | 1/2″ to 495mm Diameter |
Beryllium Copper Alloy Rectangles Size | 33mm x 30mm to 295mm x 1066mm |
Finish | Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black |
Length | 1000mm-6000mm |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
Technique | CuBe2 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
Form | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc. |
C172 / C17200 Beryllium Copper Rod and Bar Equivalent Grade
STANDARD | UNS | WNR. |
Alloy 25 (C17200) | C17200 | 2.1247 |
Beryllium Copper Round Bar Types
ASTM B196 Copper Beryllium Alloy Rod and Bar Chemical Composition
Element | Cu | Al | Be | Co | Si |
Min./Max. | Rem. | .20 | 1.80-2.00 | .20 min | .20 |
Nominal | 98.1 | – | 1.90 | – | – |
CuBe2 – C17200 (Alloy 25) Beryllium Copper Rod Physical Properties
Element | Density | Thermal Conductivity | Electrical Conductivity | Softening Temp |
Beryllium Copper Alloys | 8.3 g/cc | 0.3 cal/cm.cm²/s/°C | 22% IACS | 300°C |
Beryllium Copper C17200 Bar and Rod Mechanical Properties
Element | Tensile Strength (Min) | Yield Strength (0.2%Offset) Min | Elongation %(Min) | Hardness HRC (Min) |
Beryllium Copper Alloy | 1050 | 850 | 2 | 35 |
Sizes Available
7/8 in
|
Beryllium Copper Bar – 0.125 in
|
1 in
|
Beryllium Copper Bar – 1 in
|
1 1/2 in
|
Beryllium Copper Bar – 1 1/2 in
|
1 1/4 in
|
Beryllium Copper Bar – 1 1/4 in
|
1 1/8 in
|
Beryllium Copper Bar – 1 1/8 in
|
1 3/4 in
|
Beryllium Copper Bar – 1 3/4 in
|
1 3/8 in
|
Beryllium Copper Bar – 1 3/8 in
|
1 5/8 in
|
Beryllium Copper Bar – 1 5/8 in
|
1 7/8 in
|
Beryllium Copper Bar – 1 7/8 in
|
2 in
|
Beryllium Copper Bar – 2 in
|
2 1/2 in
|
Beryllium Copper Bar – 2 1/2 in
|
2 1/4 in
|
Beryllium Copper Bar – 2 1/4 in
|
2 1/8 in
|
Beryllium Copper Bar – 2 1/8 in
|
2 3/8 in
|
Beryllium Copper Bar – 2 3/8 in
|
3 in
|
Beryllium Copper Bar – 3 in
|
3 1/2 in
|
Beryllium Copper Bar – 3 1/2 in
|
4 in
|
Beryllium Copper Bar – 4 in
|
4 1/2 in
|
Beryllium Copper Bar – 4 1/2 in
|
5 in
|
Beryllium Copper Bar – 5 in
|
5 1/2 in
|
Beryllium Copper Bar – 5 1/2 in
|
6 in
|
Beryllium Copper Bar – 6 in
|
1/2 in
|
Beryllium Copper Bar – 1/2 in
|
3/4 in
|
Beryllium Copper Bar – 3/4 in
|
3/8 in
|
Beryllium Copper Bar – 3/8 in
|
5/8 in
|
Beryllium Copper Bar – 5/8 in
|
7/8 in
|
Beryllium Copper Bar – 7/8 in
|
Other Available Stock of Beryllium Copper Round Bar UNS C17200
- C17200 Beryllium Copper Hexagon Bar
- CuBe2 / Copper Beryllium C17200 Round Bar
- Beryllium Copper C17200 Forged Round Bars
- Beryllium Copper Alloy C17200 Hot Rolled Bars
- Beryllium Copper C17200 Threaded Bars Exporter
- C17200 Beryllium Copper Polish Bars Stockholder
- UNS C17200 Beryllium Copper Bright Bar Stock
- SB196 Beryllium Copper C17200 Cold Rolled Bar
- Beryllium Copper C17200 Cold Finish Round Bar
- Beryllium Copper C17200 Hot Finished Round Bar
- CDA 172 Beryllium Copper Alloy Bar in Mumbai
- C17200 Beryllium Copper Hexagonal Bar Trader
- Beryllium Copper C172 Round Bar
- Beryllium Copper C17200 Rod Manufacturers
- Beryllium Copper Alloy 25 Round Bar Suppliers
- C17200 Beryllium Copper Round Bars in India
- Beryllium Copper CDA 172 Square Rods Stockist
- Beryllium Copper Triangle Bar Exporter
- CuBe2 UNS C17200 Rectangle Bar Dealer
- Beryllium Copper Alloy C17200 Hex Rods
- Beryllium Copper UNS C17200 Cold Drawn Bar
- Beryllium Copper Forged Rod in India
- ASTM B196 Beryllium Copper Half-Round Bar
- UNS C17200 Beryllium Copper Round Bar